FCI presents move change to guard from dry running

Fluid Components International’s twin alarm FLT93 Series circulate change offers an early warning alert to the potential of dry running situations, cavitation and different pump issues that may result in emergency shutdowns and dear maintenance.
The FLT93 Series move swap reliably monitors the flow and temperature of liquids, gases, and slurries. – Image: Fluid Components International
FCI’s FLT93 Series flow switch reliably monitors the circulate and temperature of liquids, gases, and slurries. It is designed for pump wet/dry detection, where sudden, sudden reductions in media circulate charges can leave pumps susceptible to over-heating situations that shutdown process lines and require troubleshooting and fixing. Certified rated instrument is meant for heavy-duty, potentially hazardous process industry environments and comes with a comprehensive listing of worldwide security approvals.
It has a no transferring parts design and provides a robust scheme for pump protection with its dual alarm capability. With Alarm 1, the swap detects a low circulate situation wherever between zero.01 and three ft per second FPS (0.003–0.9 m per second MPS). This low circulate alarm is a pre-warning sign for the control system or operator who can then determine to keep the pump operating or to close it down.
If an Alarm 2 occurs as a end result of the feed line to the pump is running dry, this is in a position to be an emergency sign to close down the pump instantly as a result of the bearings now see gas as a substitute of a liquid as a heat transfer media. In Expires , the temperature of the bearings may rise very fast. Using a move switch prevents permanent injury to the pump’s bearings.

Leave a Comment